Machine Firmware Update - Ricoh M080 Service Manual

5.2.3 MACHINE FIRMWARE UPDATE

Each program must be updated one a time. Follow the procedure below to update one program.
1. Prepare a card that contains the required program.
2. If the machine is on, switch it off.
3. Remove the SD card cover (
4. Insert the SD card into Slot 2.
5. Turn on the power.
6. "Please Wait" appears, then you will see "Preparing to Start Firmware Update...".
7. Firmware names are displayed on the LCD.
8. Scroll to the program to upgrade, then press [OK].
9. Press the [UPDATE] to start the upgrade.
Loading
*****************
Update done
xxxxxxxxx
SM
x 1).
5-5
Updating the Firmware
M080