Oil Pump - Suzuki GZ250 Service Manual

Hide thumbs Also See for GZ250:
Table of Contents

Advertisement

• Install the gearshift cam driven gear assembly.
• Install the pawl lifter
NOTE:
Apply a small quantity of THREAD LOCK "1342" to the
threads of the screws.
99000-32050: THREAD LOCK "1342"
• Install the return spring
• Install the gearshift shaft.
NOTE:
Align the center teeth on the gearshift shaft with the center
teeth on the gearshift cam driven gear.

OIL PUMP

• Apply engine oil to the sliding surfaces of the oil pump
case, outer rotor, inner rotor and shaft, before mounting the
oil pump.
• Apply a small quantity of THREAD LOCK "1342" to the oil
pump mounting screws and tighten them.
99000-32050: THREAD LOCK "1342"
• Install the washer
• Install the oil pump driven gear
and cam guide
to the gearshift shaft as shown.
and pin
and circlip
ENGINE 3-54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents