Toshiba e-studio 167 Service Manual page 229

[C] Exit roller
(1) Take off the fuser roller unit.
P.13-12 "[B] Pressure roller unit / Fuser
roller unit"
(2) Release the latch and take off the gear-A.
(3) Take off the gear-B.
(4) Remove the bracket.
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Gear-A
Fig. 13-9
Gear-B
Fig. 13-10
Bracket
Fig. 13-11
13 - 13
e-STUDIO167/207/237
FUSER / EXIT UNIT
13