Toshiba e-studio 167 Service Manual page 213

(3) Remove 1 screw and take off the tensioner
bracket.
(4) Remove 2 screws and take off the holder.
(5) Remove 2 bushings and 2 oil seals from the
holder.
(Replacement of Oil seal:
Replacement of Oil Seal")
(6) Take off the mixers-2 and -3.
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
P.12-21 "[H]
12 - 19
Holder
Tensioner bracket
Fig. 12-28
Oil seal
Bushing
Fig. 12-29
Mixer-3
Mixer-2
Fig. 12-30
e-STUDIO167/207/237
DEVELOPMENT SYSTEM
12