Toshiba e-studio 167 Service Manual page 185

[F] Main charger cleaner
(1) Take off the main charger.
P.11-12 "[D] Main charger"
(2) Release the hook of the cleaning shaft. Then
rotate the shaft at 90 degrees to take it off.
[G] Needle electrode
(1) Take off the main charger grid and main
charger cleaner.
P.11-12 "[E] Main charger grid"
P.11-13 "[F] Main charger cleaner"
(2) Take off the terminal covers of both front and
rear sides.
(3) Remove the terminal and spring. Then take
off the needle electrode.
Notes:
1. Do not touch the needle electrode directly
with bare hands.
2. Make sure not to hold or bend the needle
electrode.
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Main charger cleaner
Fig. 11-17
Fig. 11-18
Needle electrode
Fig. 11-19
11 - 13
Terminal cover
Terminal
Spring
e-STUDIO167/207/237
DRUM RELATED SECTION
11