Toshiba e-studio 167 Service Manual page 76

(C) Misfeed in equipment
• Exit sensor detects jamming of the leading edge of paper.
Registration clutch ON
Less than 1.808 sec.
Exit sensor ON
If the exit sensor is not turned ON after 1.808
sec.
Paper jam (E01)
stopped.
• Exit sensor detects jamming of the tailing edge of paper.
Registration clutch OFF
Less than 1.759 sec.
Exit sensor OFF
If the exit sensor is not turned OFF after 1.759
sec.
Paper jam (E02)
stopped.
• Immediately after the power ON
Any of all sensors on paper transport path detects paper (ON)
Paper jam (E03)
• Front cover is opened during copying
Paper jam (E41)
• The registration sensor (S4) is not turned ON in a fixed period of time when paper is fed out of the
ADU.
Paper jam (E11)
e-STUDIO167/207/237
GENERAL OPERATION
The copying operation is
The copying operation is
Registration clutch
Exit sensor
Timer
Registration clutch
Exit sensor
Timer
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
4 - 8
ON
ON
0
1.808sec.
Paper jam (E01)
Fig. 4-1
OFF
ON
0
1.759sec.
Paper jam (E02)
Fig. 4-2