Toshiba e-studio 167 Service Manual page 158

[E] Bypass pickup roller
(1) Take off the bypass roller unit.
P.10-12 "[D] Bypass roller unit"
(2) Take off the bypass pickup roller and the
shaft.
[F] Bypass feed roller
(1) Take off the bypass roller unit.
P.10-12 "[D] Bypass roller unit"
(2) Remove 1 clip. Then pull out the shaft.
(3) Take off the bypass feed roller.
e-STUDIO167/207/237
PAPER FEEDING SYSTEM
Shaft
Bypass pickup roller
Shaft
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
10 - 14
Fig. 10-18
Bypass feed roller
Clip
Fig. 10-19