Toshiba e-studio 167 Service Manual page 233

(4) Remove 5 drum separation fingers with the
springs.
[F] Center heater lamp / Side heater lamp (LAMP1/LAMP2)
(1) Take off the fuser roller unit.
P.13-12 "[B] Pressure roller unit / Fuser
roller unit"
(2) Remove 2 screws on each terminal of both
center heater lamp and side heater lamp.
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Separation finger
Spring
Fig. 13-21
Fig. 13-22
13 - 17
e-STUDIO167/207/237
FUSER / EXIT UNIT
13