Toshiba e-studio 167 Service Manual page 167

(4) Remove 1 screw and take off the pickup
solenoid from the bracket.
[O] Drawer pickup clutch
(1) Take off the main motor drive unit.
P.9-7 "[C] Main motor drive unit"
(2) Take off the pickup solenoid bracket.
P.10-22 "[N] Pickup solenoid (SOL1)"
(3) Remove 1 E-ring, and take off the drawer
pickup clutch.
(4) Take off the cover-A, cover-B, spring and
flange.
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 10-41
Drawer pickup clutch
Fig. 10-42
Fig. 10-43
10 - 23
Pickup solenoid
E-ring
Cover-B
Cover-A
e-STUDIO167/207/237
PAPER FEEDING SYSTEM
10