Removing Taken-Up Media - Roland VersaUV LEC-300 User Manual

3-2 Using the Media Take-up System
To Take up Media Manually
You can take up media by using the MANUAL switch. However, never operate the MANUAL switch while the loading lever is
pulled back. Doing so may cause the media to be pulled with excessive force, actuating the protective feature and resulting
in an error.

Removing Taken-up Media

CAUTION

Cut off the media.
 P. 38, "Cutting Off the Media"

Support the paper tube to prevent it from falling.

Loosen the arm retaining screw and move the arm.

Detach the paper tube from the end caps.
Arm retaining screw
52 Chapter 3 Operation of the Media Take-up System
Removal of taken-up roll media from the unit is a task which must be carried out
by two or more persons.
If dropped, such items may cause injury.


Take-up with in-
ward curl
Take-up with outward
curl
