2-6 Performing Cutting
Making the Setting for Blade Force
Procedure
FORCE
50gf
W 736mm
SETUP SHEET
ROLL
Pressing
enters the cutting configuration menu. You can also make the settings for other cutting conditions in ad-
dition to the blade force. Refer to the following pages.
P. 96, "Fine-tuning the Cutting Conditions"
When you're finished making all the settings, send cutting data from the computer.
P. 39, "Getting Ready to Receive Data from a Computer"
46
Chapter 2 Basic Operation
Press
Use
60gf
Press
original screen.
.
to enter the value.
to finish making the setting, and go back to the