Removing The Packing Materials - Roland CAMM-1 GS-24 Installation Manual

1. Installation

Removing the Packing Materials

Packing materials are attached to the machine to protect it from vibration during transportation.
When installation is complete, remove these materials.
WARNING This work must be performed before connecting the power cord.
If the power is turned on while this work is in progress, there is a risk of injury such as
hands or fingers getting caught.
• Remove all packing materials. Any that remain may cause faulty operation or breakdown when
the power is switched on.
• Store the packing materials carefully, because they are needed again when transporting the
machine or the like.
E-14