Table of Contents
Advertisement
About Media
This section describes the size and weight specifications of media that can be used with this machine, and
how to store and handle media.
Size and Weight Specifications of Supported Media
Supported media size and weight are shown below:
Media size:
600 × 450 – 2,510 × 1310 mm (approx. 23.6 × 17.7 – 98.8 × 51.6 inches)
Printable size:
600 × 450 – 2,500 × 1,300 mm (approx. 23.6 × 17.7 – 98.4 × 51.2 inches)
Media thickness:
110 mm (approx. 4.3 inches) or less
Media weight:
45 kg/m
or less
2
How to Store Media
Take the following precautions when storing media:
• Make sure to store media in a place that is not exposed to direct sunlight and is free from humidity
and dust.
• For media that warps easily, store the media, for example, by placing it on a smaller table, so that
the media warps down. Warped up media may be impossible to vacuum on the table.
• When storing the media printed in [Draft] mode, do not pile them on top of each other. Doing so
may cause the media to stick to each other.
Precautions for Handling Media
Take the following precautions when handling media:
• Make sure to wear protectors such as safety shoes and gloves when using heavy media. Using
heavy media without wearing protections might cause an injury.
About Media
27
Advertisement
Table of Contents
