Windows Nt Server 4.0 - Toshiba Magnia 3135R User Manual

Software Installation
1
2
3
4
5
6
7
8
9
10
11
❖
Insert a formatted floppy disk into the dloppy drive a:.
❖
At the prompt, type fdimg -w <filename.img> a
❖
Insert additional disks as needed for multiple disk sets.
❖
Create a label for each set and apply to the floppy disks.

Windows NT Server 4.0

NOTE: Always connect a PS/2 mouse as your keyboard may not work with a serial
mouse.
You will need to provide driver diskettes for the on-board and optional equipment
during the installation of Windows NT 4.0. Please refer to Installing Drivers below.
If you have more than 1.7 GB of memory, Windows NT 4.0 cannot be properly
installed. To install Windows NT 4.0:
1 Reduce the installed memory to less than 1.7 GB.
2 Install Windows NT.
3 Update Windows NT with Microsoft's Service Pack 6a or later.
4 Shut down the system and reinstall your additional memory.
Prepare your server's system configuration and RAID array (if the optional RAID adapter
is installed) before starting the operating system installation. Refer to the Magnia 3135R
User's Guide for detailed instructions on configuring the server.
ADA02.img = Adaptec 7899 NT/9x
ADA03.img = Adaptec 7899 Netware
AMINT.img = MegaRAID Drivers & Utility NT4
AMIW2K.img = MegaRAID Drivers & Utility W2K
AMINWDOS.img = MegaRAID Drivers & Utilities NW/
DOS
IDECD.img = CD-ROM (IDE) DOS
INT02.img = Intel Pro/100NT
INT03.img = Intel Pro/100 NW
RAGE2C.img = ATI Rage IIc Video Driver
TOS03.img = Toshiba HW Diagnostics
TOS07.img = Toshiba Display Power Save
Windows NT Server 4.0
1 Disk
1 Disk
1 Disk
1 Disk
1 Disk
1 Disk
1 Disk
1 Disk
1 Disk
1 Disk
1 Disk
143