Table of Contents
Advertisement
Connecting Hardware Devices
1
If the server is in operation, shut it down and remove the access cover. For
instructions, see
2
Holding the DIMM by its edges only, remove it from its anti-static package.
3
Orient the DIMM so that the two notches on the bottom edge align with the keyed
socket.
Installing memory modules
4
Insert the bottom edge of the DIMM into the socket and press down firmly on the
DIMM until it seats correctly.
5
Gently push the plastic ejector levers on the socket ends to the upright position.
6
Repeat steps 2 through 5 to install each DIMM.
7
Ensure that no cables are protruding from the server chassis and then replace the
server cover.
8
Connect all external cables and the power cord to the server.
9
Turn on the monitor and then the server.
Removing the Access Cover
on page 53.
59
Memory Modules
Advertisement
Table of Contents
