Table of Contents
Advertisement
Hardware Diagnostics
3
Using the arrow keys, select one of the following SCSI HDD tests.
❖
01. Sequential address read
Sequentially reads all blocks on the specified HDD, starting at block 0.
When this SCSI HDD test is selected, the following screen displays:
Use the arrow keys to select the following:
- 01. Go to Test
Starts the test. To stop, press Ctrl + Break.
- 02. Test Loop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
- 03. Error Stop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
- Host ID number
Press Enter to select the HDD to be tested. Choose ALL to test all HDDs connected
to the server.
- SCSI ID number
Press Enter to select the SCSI ID to test.
116
01. Diagnostic Test
Advertisement
Table of Contents
