Hardware Diagnostics
When this SMC test is selected, the following screen displays:
Use the arrow keys to select the following:
- 01. Go to Test
Starts the test. To stop, press Ctrl + Break.
- 02. Test Loop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
- 03. Error Stop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
❖
02. Front Panel test
Verifies the functions of the sever management controller's front panel LEDs and
buttons.
130
01. Diagnostic Test