Chapter 3
System Configuration
Setup
This chapter describes the Power-On Self Test (POST) and server configuration utilities.
The table below describes each of the utilities.
Utility
BIOS Setup
BIOS Update Utility
Using the Adaptec
SCSI Utility
Hot Keys
To do this
Clear memory and reload the operating
systemthis is a system reset
Secure the system immediately
Description and brief procedure
If the system does not have a diskette drive, or if the
drive is disabled or misconfigured, use Setup to enable
it. Or, you can move the CMOS jumper on the server
board from the default setting (protect CMOS memory)
to the Clear setting; this will allow most server
configurations to boot.
Use to update the BIOS or recover from a corrupted
BIOS update.
Use to configure or view the settings of the SCSI host
adapters and onboard SCSI devices in the server.
Press these keys
<Ctrl+Alt+Del>
<Ctrl+Alt>+hot key (Set the hot-key combination
with the BIOS System Setup Utility.)
82
Page
84
93
94