Table of Contents
Advertisement
Hardware Diagnostics
- Channel number
Press Enter to select the channel number to test.
❖
02. Connection
Reads the logical sector at the end of the specified HDD to verify if the drive is
connected or not.
When this SCSI HDD test is selected, the following screen displays:
Use the arrow keys to select the following:
- 01. Go to Test
Starts the test. To stop, press Ctrl + Break.
- 02. Test Loop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
- 03. Error Stop
Press Enter to toggle between YES and NO.
YES increments the pass counter each time the test cycle ends and restarts the test
cycle.
NO returns the subtest menu to the Main menu after the test is completed.
117
01. Diagnostic Test
Advertisement
Table of Contents
