Battery Installation & Charging - AT&T E1828B User Manual
5.8 ghz corded/cordless telephone/answering system with caller id/ call waiting
Hide thumbs
Also See for E1828B:
- Quick start manual (6 pages) ,
- User manual (72 pages) ,
- Quick start manual (6 pages)
Table of Contents
Advertisement
Getting started
Battery installation & charging
After installing the battery, you may be able to make or receive short calls. For
best performance, place the handset in charger to charge for 16 hours before
use.
You can keep the battery charged by returning the handset to charger after use.
When the battery is fully depleted, a recharge takes about 12 hours. The average
talk time on a fully charged battery is about eight hours, and the standby time is
approximately three days. Actual battery life depends on usage conditions and
age of battery.
1. Plug the small end of
the smaller power adapter
into the jack on the under-
side of the charger, then
route the cord through the
slot as shown.
6. You may be able to make or receive
short calls. For best performance, place
the handset in charger to charge for at
least 16 hours before first use.
BATTERY LOW
10:08
Battery low indicator
Return the handset to the
charger to recharge when this
symbol flashes and the hand-
set beeps or when the hand-
set screen displays NEEDS
RECHARGING.
Caution: Use only the supplied rechargeable battery or replacement battery 2422 (SKU 23402,
part number 89-0047-00-00) or equivalent. To order a replacement battery, visit our website at www.
telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
2. Plug the large
end of the smaller
power adapter into
an electrical outlet
not controlled by a
wall switch.
3. Insert the plug as indi-
cated. Be sure to securely
insert the plug, making
sure matches the color-
coded label inside the
battery compartment.
NEEDS RECHARGING
-- 1 --
then
02/14
AM
4. Place the bat-
tery and wires
inside the com-
partment.
NOTE: Under normal conditions, the
battery should last around one year. This
may vary depending on usage.
7
5. Slide the bat-
tery compart-
ment cover up
until it clicks.
To replace the battery,
press in and downward
on the tab of the bat-
tery compartment to
open the battery com-
partment cover. Lift
out the old battery
and disconnect it from
the handset. Follow
the instructions on
this page to install and
charge the new battery.
Advertisement
Table of Contents
