Basic Cordless Handset Operation - AT&T E1828B User Manual

PHONE ON 00:49
5201314
NOTE: Pressing
OFF/CLEAR on a handset
will only temporarily silence
the ringer on that handset.
The other cordless hand-
set and telephone base will
continue to ring normally.
Telephone operation

Basic cordless handset operation

Making and answering calls
To answer an incoming call, press
(or any key except
or DIR /VOLUME+). If you have caller ID service,
the caller's number and name will appear on the
display screen after the first or second ring (see
page 30 for caller ID features and options).
To make a call, press
number. Press OFF/
hang up.
To preview numbers before dialing, enter num-
bers first, then press
Press CID/-VOLUME then
to make corrections when entering numbers.
NOTE: Only one cordless handset or one cordless handset
and the base can be on a call at a time. If the other cordless
handset attempts to join the call, its screen will display OTHER
HANDSET ON and then OR OUT OF RANGE.
Last number redial
Press REDIAL/
PAUSE
display the last number called (up to 32 digits). To
dial the number displayed, press
You can also press
REDIAL/ to dial the last number called with-
PAUSE
out previewing it . To delete this number, press
REDIAL/ twice. This will clear the redial
PAUSE
memory and leave it blank.
Ring silencing
The cordless handset ringer can be temporarily
turned off by pressing
ing ringing. You can answer the call, or let the caller
leave a message. This will silence the ringer without
disconnecting the call. If your answering system is
on, the caller will be asked to leave a message (page
38). The next call will ring normally.
15
PHONE/
OFF , CID/-VOLUME
/CLEAR
PHONE/ , then dial a
FLASH
or place in charger to
CLEAR
PHONE/
FLASH
/DELETE anytime
INT
on the cordless handset to
PHONE/
PHONE/
FLASH
OFF/ during incom-
CLEAR
FLASH
to dial.
.
FLASH
and then