To Dial Or Change An Entry - AT&T E1828B User Manual

1
DIR
DIRECTORY
2
DIR
ADRM
5551234
3
SELECT/
TRANSFER
SPEED EDIT ERASE
5551234
DIR
SPEED EDIT ERASE
5551234
DIR
SPEED EDIT ERASE
5551234
SELECT/
Press TRANSFER to
choose blinking option on the
handset.
NOTES:
1. Screens shown above are
displayed on the cordless
handset. The telephone
base display is slightly dif-
ferent, but the procedure is
the same.
2. See page 27 for instruc-
tions on dialing a directory
entry from the base.
Telephone operation

To dial or change an entry

You can make existing directory entries to speed
dial entries if they are stored in the handset.
You can also change names, numbers and the
distinctive ringing settings, or erase entries, that
are stored in the cordless handset or the tele-
phone base. When any entry is displayed, press
SELECT/
TRANSFER
or DIR to highlight the option you want (blinking
text), then press SELECT/
To make an entry a speed dial entry (cordless
handset only)
When SPEED is blinking, press SELECT/
dial a memory location (1-9) to make this entry a
speed dial entry.
If you choose a memory location that is already
assigned to a different entry in the directory, that
entry will remain in the directory, but will not have
a speed dial location.
To edit an entry
Press CID or DIR
press SELECT/
TRANSFER
and number (or distinct ring setting on the cordless
handset) by following the steps described on pages
25-26.
To delete an entry
Press CID or DIR
press SELECT/
TRANSFER
screen ( ERASE NO YES ).
To delete the entry, press DIR
then press SELECT/
To abort the procedure and leave the entry intact, press
CID to highlight NO, then press SELECT/
29
to see the options. Press
.
TRANSFER
TRANSFER
until EDIT is blinking, then
. You can change the name
until ERASE is blinking, then
to display a confirmation
to highlight YES ,
.
TRANSFER
CID
, then
.
TRANSFER