AT&T E1828B User Manual page 14

DATE/TIME
10:08 02/14
AM
Telephone operation
Handset settings
Set handset date & time
The handset displays the date & time when idle.
You can set the time manually, or you can allow
it to be set automatically with incoming caller ID
information. The time will be set automatically
only if you subscribe to caller ID service provided
by your local telephone company (page 30).
• Press MENU
/CHAN
• Press CID/-VOLUME or DIR /VOLUME+ until
t h e s c re e n d i s p l a y s DAT E / T I M E . P re s s
SELECT/
TRANSFER
• The month in the displayed date starts to flash.
Use CID/-VOLUME or DIR /VOLUME+ to
scroll through the numbers 1 (for January), 12
(for December). Press SELECT/
the appropriate month is flashing.
• The date starts to flash. Use
or DIR /VOLUME+ to scroll through the num-
bers 01-31. Press SELECT/
appropriate date is flashing.
• The hour starts to flash. Use CID/-VOLUME or
DIR /VOLUME+ to scroll through the numbers
1-12. Press SELECT/
priate hour is flashing.
• The minute starts to flash. Use
or DIR /VOLUME+ to scroll through the num-
bers 00-59. Press SELECT/
appropriate minute is flashing.
• The AM/PM starts to flash. Use CID/-VOLUME
or DIR /VOLUME+ to alternate between AM
and PM. Press SELECT/
appropriate option is flashing, save the selec-
tion and exit.
NOTES:
1. You can choose to set the time manually, or you can allow
it to be set automatically with incoming caller ID informa-
tion. The time will be set automatically only if you sub-
scribe to caller ID service provided by your local telephone
company .
2. Caller ID will not set the year. See page 39 for instructions
on how to set the year.
11
to begin programming.
to confirm.
TRANSFER
CID/-VOLUME
TRANSFER
when the appro-
TRANSFER
CID/-VOLUME
TRANSFER
TRANSFER
when
when the
when the
when the