Changing Feature Options - AT&T E1828B User Manual

16
1.
SETUP
Press until desired fea-
ture is heard (see list at
right).
2.
SKIP or
REPEAT
Press until desired selec-
tion is heard.
3.
SETUP
Press to set selection
and move to next menu
option.
- OR -
STOP
PLAY/
Press to set selection
and exit menu.
Answering system operation

Changing feature options

Menu features can be changed to program how the
answering system operates. Press SETUP repeatedly
to hear each feature. When you hear the feature
you want to modify press
SETUP to change the setting.
Feature options
System announces:
"Number of rings," current
setting, then "To change
the setting press SKIP
or REPEAT; to continue
setup, press SETUP."
Options: 2/4/6/toll saver
"Call screening," cur rent
setting, then "To change
the setting, press SKIP
or REPEAT; to continue
setup, press SETUP."
Options: on/off
"Remote access code,"
current setting, then "To
change the setting press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
Options: (select a two-digit
code) 19
"Message alert tone," cur-
rent setting, then "To
change the setting, press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
Options: on/off
NOTE:
Press and hold
increase or decrease the remote access code number by by
increments of 10.
41
SKIP or REPEAT then
(Default settings underlined).
Feature description:
Choose number of rings before the
system answers a call. When toll
saver is active, the system answers
after two rings if you have new
messages, and after four rings if
you have no new messages. When
retrieving messages from a long
distance call, you may disconnect
your call after three rings so that
there will be no long distance
charge incurred.
When on, you can hear callers
leave messages, or answer the call.
Enter a two-digit number (10-99)
for remote access from another
telephone (page 44).
When on, the telephone beeps
every 10 seconds when there are
new messages.
SKIP or REPEAT to