Installation and setup After installing the battery, you may be able to make and receive short calls. For best performance, place the handsets in the telephone base or the charg- er and charge for 16 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use.
Page 3
Installation and setup Plug one end of the telephone line cord Plug the small end of the power adapter into into the telephone jack at the bottom of the power jack at the bottom of the telephone the telephone base. base.
Quick reference guide Cordless handset MENU/SELECT CID/-VOLUME Press to display the menu. Once in the menu, press to select an item Press to scroll down while in or save an entry or setting. menus. Press to display caller ID information. While entering names or numbers, press to /VOLUME+ move the cursor to the left.
Quick reference guide Telephone base CHARGE/IN USE Flashes when another telephone on the same line or one of the handsets is in use. Flashes when the answering system is answering an incoming call. HANDSET LOCATOR Flashes while an incoming call is ringing. Press to make handsets On steady when the handset is beep.