Base Settings - AT&T E1828B User Manual

LANGUAGE
DIAL MODE: TONE
NOTES:
1. This sets the dial mode for the
telephone base only.
2. During a power failure,
only the corded handset
can be used to make and
answer calls. The dial mode
will default to pulse dial. To
change to tone dial temporar-
*
ily, press TONE on the tele-
phone base (page 18). When
the power is restored, the dial
mode will return to the pro-
grammed setting.
Telephone operation

Base settings

You can change settings to program how the tele-
phone base works.
Follow the steps below to program the telephone
base. To stop at any time, press CLEAR. If the
telephone rings, programming stops automatically
so you can answer the call.
Choose telephone base language
At this menu you can select the language used in
all menus and screen displays.
• Press MENU to begin programming.
• Press CID or DIR
LANGUAGE .
• Press SELECT to change current setting.
• Press CID or DIR to scroll through the available
options of ENGLISH, ESPANOL and FRANCAIS.
• Press SELECT to select the displayed language
and exit.
Choose dial mode
At this menu you can choose tone or pulse dial-
ing. The factory default setting is TONE. Change
this to PULSE only if you do not have touch-tone
dialing service.
• Press MENU to begin programming.
• Press CID or DIR until screen displays DIAL MODE
and setting.
• Press SELECT to change current setting.
• Press CID or DIR
PULSE.
• Press SELECT to select displayed dial mode and
exit.
13
until the screen displays
to display TONE or