Belt Clip & Optional Headset - AT&T E1828B User Manual

5.8 ghz corded/cordless telephone/answering system with caller id/ call waiting

Hide thumbs Also See for E1828B:

Table of Contents

Getting started

Belt clip & optional

Install belt clip as shown below if desired.

For hands-free telephone conversations, use any industry standard 2.5 mm headset

(purchased separately). For best results, use an AT&T 2.5 mm headset. To

order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com

or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.

headsett

To release belt clip from

handset, lift one side of

the belt clip out of the

notch.

Snap belt clip

into notches

on both sides

of handset.

Plug 2.5mm head-

set into jack on side

of handset (beneath

small rubber flap).

NOTE: If the sound quality of the

headset is not good, try unplugging it,

and firmly plugging it in again.

Table of Contents

E5828b