Editing Fade In/Out Lengths And Levels; Using Rehearsal Playback Functions - Tascam HS-4000 Owner's Manual

9 – Playlist mode

Editing fade in/out lengths and levels

1. Press the HOME key on the front panel to open the Home
Screen.
2. Touch a file name or title name button to open a pull-down
menu and touch the ADJUST ENTRY button to open the
ADJUST XXX screen ("XXX" is the entry number).
CAUTION
When you open the ADJUST XXX screen, playback stops.
3. Touch the Start TC Fade/Level tab to open the following
screen.
4. After selecting the Fade In, Fade Out or Level knob, turn the
DATA dial to set the value.
Setting ranges:
• Fade In/Out Length: 0–30 seconds (0.1 second/step or
1.0 second/step when pressing and turning)
• Level: −∞ to +10 dB
NOTE
• When changing the length of a fade in/out, the fade in/out
length settings are automatically restricted so that the fade
in/out length will not extend past the playback start or end
times.
• The set level is shown by the solid red line.
• The reference level (0 dB) is shown by the dotted orange line.
92
TASCAM HS-4000

Using rehearsal playback functions

On the ADJUST ENTRY screen, you can use the transport
functions to conduct rehearsal playback.
• Other than using the. and / keys to move to file
beginnings, Start Points, End Points and file endings,
transport operations are the same as usual.
• If you change the Start Point or Fade In Length, the
playback position will move to the Start Point. If you make
this change during playback, playback will resume after
moving to the new playback position.
• If you change the End Point or Fade Out Length, the
playback position will move as follows. If you make this
change during playback, playback will resume after moving
to the new playback position.
PREVIEW OFF
2 seconds before
End Point changed
End Point
2 seconds before
Fade Out Length
Fade Out start
changed
position
• Use the PREVIEW button to change the rehearsal playback
contents.
Rehearsal playback when PREVIEW OFF
• Fade IN/OUT and Level Adjust settings do not affect the
playback sound.
• You can move to points outside the region between the
Start and End Points.
• When the End Point is reached during playback, playback
stops and the playback position moves to the Start Point.
Press the PLAY key to start playback from the Start Point.
To move to a point after the End Point, use the , key,
/ key, SHIFT+/ key or the JOG/SHUTTLE dial.
Rehearsal playback when PREVIEW ON
• Playback is only possible in the region between the Start
and End Points.
The transport cannot be moved outside this region.
• Fade IN/OUT and Level Adjust settings affect the playback
sound.
PREVIEW ON
2 seconds before
Fade Out start
position
2 seconds before
Fade Out start
position