Security Screws; About The Display; Adjusting The Display Angle; Adjusting Display And Indicator Brightness - Tascam HS-4000 Owner's Manual

3 − Preparation

Security screws

The included security screws can be used to lock the CF card slot
covers.
Use a Phillips head screwdriver to install or remove the screws.

About the display

Adjusting the display angle

Push the LCD TILT button to unlock the display, and then pull the
bottom of the display forward to adjust the angle.
Pull the bottom of the display until you hear a clicking sound.
To restore it to its flat position, push the LCD TILT button again to
unlock the display, and push the bottom of the display.
Push the bottom of the display until you hear a clicking sound.
CAUTION
Do not push the display screen itself.
26
TASCAM HS-4000

Adjusting display and indicator brightness

Turn the DATA dial while pressing and holding the HOME key to
adjust the brightness of the color display, the PAUSE, REC, PLAY
and ONLINE keys, and the JOG (SHUTTLE), SLOT 1 and SLOT
2 indicators. Push and turn the DATA dial while pressing and
holding the HOME key to adjust only the brightness of the color
display.

Cautions related to display use

• The display can easily be scratched, so do not use pointed
objects, including fingernail tips, to touch it. Always touch it
with your fingers.
• Do not press the display forcefully with a finger or poke
it with a pen, toothpick or other pointed object. Doing so
could damage the display or cause malfunction.
• The display touch screen is constructed of a film and glass.
Do not apply strong force to its surface. Doing so could
break the glass.
• When using the display, do not put a hand on the panel or
push around the display forcefully. Doing so could prevent
accurate position detection.
• Do not place anything on top of the display or otherwise
put weight on the same place for a long time. Doing so
could cause the panel to warp or result in inaccurate
position detection.
• Do not apply a commercially-available screen protection
film to the display. Doing so could prevent normal
operation.
• Gently wipe the display with a soft dry cloth that does not
shed dust (e.g. a cleaning cloth). Avoid wiping with a stiff
cloth or rubbing with force. Doing so could damage the
surface of the LCD. Do not use thinner, manicure remover,
alcohol or similar substances.
NOTE
The display is produced with extremely high-precision
manufacturing technologies, and 99.99% or more of
the pixels are effective, but sometimes pixels might not
appear or might appear as red or black dots. This is not a
malfunction.