Tascam HS-4000 Owner's Manual page 137

Message
Cannot increment Take.
System limit reached,Please make new
session.
Cannot load to [A or B].
"llllllll"
is already loaded to [B or A].
Cannot make more than
1000 sessions.
Cannot make new Session.
Media Full.
Cannot RECORD.
(Internal state error)
Cannot RECORD.
ABS time is over 24h
Cannot RECORD.
Media Full.
Cannot RECORD
Play Fs setting is not OFF
Please change Play Fs to OFF
Cannot RECORD
System limit reached.
Please make new Session.
Cannot RECORD.
Take limit reached.
Please change to another Session
Cannot Retake.
No Recent REC history.
Cannot set Mark point
in ON AIR Mode.
Cannot set Mark point
in read-only file.
Cannot set Mark point.
Mark limit reached.
Cannot turn Fs convert On.
CHn-n D-In is already
Master Clock.
Cannot use Bridge file
because it is illegal.
Capture BC$ Time to ALL?
BC$STANDBY -> Start
BC$END -> End
Capture BC$ Time?
BC$STANDBY -> Start
BC$END -> End
CFn (vvvvvvvv)
Fs: fs
USED SIZE: u
FREE SIZE: f
TOTAL SIZE: t
CFn DEVICE ERROR
CFn Format failed
CFn formatting not optimal
for Recording.
Details and responses
The total number of files in the folder, including files
and subfolders, is too large, so starting recording of
the next take is not possible.
The playlist that you tried to load is already loaded to
B or A, so it cannot be loaded to the other player. Load
a different playlist.
The maximum number of sessions has already been
reached, so a new session cannot be created.
The CF card does not have enough space, so you
cannot create a new session.
Something is preventing recording.
The timeline mode's ABS time exceeds 24 hours so
recording cannot be started.
The CF card does not have enough space, so you
cannot start recording.
Recording is not possible because Play Fs is set to
Pull-up or Pull-down. Set Play Fs to OFF.
The total number of items in the folder, including files
and folders, is too large, so starting recording is not
possible.
Since the maximum number of recordable takes or
maximum take number has been reached, recording is
not possible. Change the session.
Retaking is not possible.
Marks cannot be added when in on-air mode.
Marks cannot be added to a file that has been set as
read-only
No more than 99 marks can be created in one file.
You tried to turn the sampling rate converter on for
the digital input that is selected as the master clock.
The bridge file is invalid, so it could not be used.
Confirm changing all entries to the region between
BC$STANDBY and BC$END mark times.
Confirm changing to the region between
BC$STANDBY and BC$END mark times
This shows information about the CF card when in on
air mode.
The CF card cannot be recognized.
An error occurred during formatting, and formatting
could not be completed.
Since the media was not formatted by this unit,
normal recording operations cannot be guaranteed.
Format the media with this unit before use.
17 – Messages
Remarks
"llllllll" = playlist name
n-n = 1-2, 3-4, 5-6, 7-8
n= 1 or 2
vvvvvvvv = volume level
fs: current sampling frequency setting
u: used capacity
f: unused capacity
t: total capacity of CF card
n = 1 or 2
n = 1 or 2
n = 1 or 2
This appears when recording is started
using a card formatted with a cluster
size that is smaller than the standard
of this unit.
137
TASCAM HS-4000