Importing Jppa Ppl Files - Tascam HS-4000 Owner's Manual

9 – Playlist mode
5. Touch the EDIT NAME button in the pull-up menu to open
the PLAYLIST NAME screen.
6. Input the playlist name.
Use the same input method as in "Editing the project name"
on page 40.
7. Touch the Enter button or press the DATA dial.
When the confirmation message pop-up appears, in single
mode, touch the OK button or press the DATA dial to confirm
the session name.
8. In dual or A/B MIXED mode, after creating a playlist press
the LOAD to A button to load it to player A or the LOAD to B
button to load it to player B.
Single mode
Dual or A/B MIXED mode
While the playlist is being created, a progress status pop-up
appears.
When playlist creation completes, the pop-up disappears.
NOTE
• Immediately after creating a new playlist that playlist
becomes the current playlist (the currently loaded playlist).
• In single mode , " C" (current) appears in the icon of the
currently loaded playlist.
• In dual or A/B MIXED mode, "A" appears in the icon of the
playlist loaded in player A and "B" appears the icon of the
playlist loaded in player B.
78
TASCAM HS-4000

Importing JPPA PPL files

You can import JPPA PPL format files into the current playlist.
JPPA PPL Format files must first be placed in the "_playlists"
subfolder inside the session folder on the CF card.
When viewed on a computer, the folder of the CF card should be
as follows.
{CF drive name}:\{project name}\{session name}\_playlists\
{JPPA PPL file name}
NOTE
If you save a playlist after importing it, the imported
contents of the playlist are saved in this folder.
If you do not save it, the imported contents of the playlist
will be cleared when you load another playlist, remove the
CF card or turn the unit off, for example.
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Press the e button for the project that contains the
JPPA PPL file that you want to import to show the playlist
selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it.
3. Press the e button for the session that contains the
JPPA PPL file that you want to import to show the playlist
selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it. Touch the OK button.
4. Touch the NEW/IMPORT button to open a pull-up menu.
5. Touch the IMPORT button in the pull-up menu to open the
IMPORT PPL screen.
A list will be shown of all the JPPA PPL files found within the
"_playlists" folder under the session folder.
6. Touch the e button for the PPL file that you want to load.
NOTE
Touch a name in the list to select a file, and the touch the
INFO button to show file information.