Editing Playback Starting Times; Editing Lengths And Levels Of Fade-Ins/Outs - Tascam HS-2000 Owner's Manual

2-channel audio recorder
Table of Contents

Advertisement

9 – Playlist mode

Editing playback starting times

1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch a file name or title name and then touch the
button in the pull-down menu to
ADJUST ENTRY
open the
ADJUST XXX
number).
NOTE
When a take is selected on the
of the key assign buttons on the left is selected on the
ASSIGN file screen, you can also open the
screen by touching the
MENU
the
button in the pull-up menu.
ADJUST
3. Touch the
Start TC Fade/Level
the page shown below. The value shown next to the
Start TC item is the playback starting time for the
selected entry.
4. Touch the
button to open the
EDIT
screen, and use the number buttons to change
T/C
the Start TC.
Use the
FRAME EDIT
screen to set whether or not you will edit the
T/C
frame value.
92
TASCAM HS-2000
screen ("
" is the entry
XXX
screen or one
ENTRY
ADJUST
button and then touching
tab to open
EDIT START
button on the
EDIT START
5. Use the number buttons to input the playback starting
time.
If you begin input without selecting a unit, input will
start from the smallest one.
To input a specific unit, touch it to make its background
yellow, and then use the number buttons and the
DATA dial to enter two digits at a time.
Touch the
CURRENT b button to copy the current
timecode to the input value.
Touch the
CLEAR button to reset all values to 00.
7. Touch the
button to confirm the setting.
ENTER
TIP
PLAY key and other transport
You can also use the
keys while listening to the audio to find a location, and
then touch the
CURRENT
value.
This can also be edited using an external keyboard.
Press the keyboard's ESC key to clear all values (set
them to 00).
Editing lengths and levels of fade-ins/
outs
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch a file name or title name and then touch the
button in the pull-down menu to
ADJUST ENTRY
open the
ADJUST XXX
number).
3. Touch the
Start TC Fade/Level
the page shown below.
b button to input that
screen ("
" is the entry
XXX
tab to open

Advertisement

Table of Contents
loading

Table of Contents