Table of Contents
Advertisement
Adjustment of the safety partition
Fig. 78 Top/lower support of the safety partition
First read and observe the introductory information and safety warn-
ings
on page 71.
Only valid for some countries.
›
Raise the loading floor part behind the safety partition.
›
On each side in the upper area of the body, undo and remove a bolt
and undo and remove a bolt in the lower area
›
Move the safety partition into the required position. Ensure it is always move
the same distance- the same number of holes on both sides both upwards and
downwards.
›
On each side in the upper area of the body, undo and remove a bolt and undo
and remove a bolt in the lower area.
›
Have the tightening torque of the bolts checked with a torque wrench as soon
as possible. The tightening torque must be 20 Nm.
›
Change the position of the cover of the luggage compartment floor behind the
safety partition so that it lines up with the new position of the safety partition.
›
Fold back the loading floor part.
» Fig. 78
-
» Fig. 78
- .
Emergency release of the loading area door
First read and observe the introductory information and safety warn-
ings
on page 71.
If there is a fault in the central locking, you can unlock the loading area door as
follows:
›
Pull the control cable towards you and pull on it.
›
Press on the loading area door to open it.
›
Press the control cable back again.
Interior lighting
First read and observe the introductory information and safety warn-
ings
on page 71.
Switching on
›
Place the cover glass in the position
Fig. 79
Emergency unlocking of the
loading area door
Fig. 80
Interior light - Praktik
» Fig.
80.
Seats and stowing
73
Advertisement
Chapters
Table of Contents
