Adjusting the left-hand exterior mirror
›
Place the rotary knob into the position
surface is identical to the movement of the rotary knob.
Adjusting the right-hand exterior mirror
›
Place the rotary knob into the position
surface is identical to the movement of the rotary knob.
WARNING
Convex (curved outward) exterior mirrors increase the field of vision. They
■
do, however, make objects appear smaller in the mirror. These mirrors are
therefore only of limited use for estimating distances to the following vehi-
cles.
Whenever possible use the interior mirror for estimating the distances to
■
the following vehicles.
Note
Do not touch the surface of the exterior mirrors if the exterior mirror heater is
■
switched on.
If the power setting function fails at any time, the exterior mirrors can be set by
■
hand by pressing on the edge of the mirror surface.
Contact a specialist garage if there is a fault with the power setting function for
■
the exterior mirrors.
» Fig.
35. The movement of the mirror
» Fig.
35. The movement of the mirror
49
Lights and visibility