Table of Contents
Advertisement
Head restraints
Introduction
Best protection is achieved if the top edge of the head restraint is at the same
level as the upper part of your head.
The head restraints must be adjusted to match the size of the seat occupant. Cor-
rectly adjusted head restraints together with the seat belts offer effective protec-
tion for the occupants
» page
124.
WARNING
The head restraints must be correctly adjusted in order to offer effective
■
protection for the occupants in the event of an accident.
Never drive with the head restraints removed - risk of injury.
■
If the rear seats are occupied, the rear head restraint must not be in the
■
lower position.
headrest adjust
Fig. 38 Head restraint: adjusting/removing
52
Using the system
First read and observe the introductory information and safety warn-
ings
on page 52.
Setting height
›
Grasp the side of the head restraint with both hands and push it upwards as re-
quired
» Fig. 38
- .
›
To move the head restraint downwards, press and hold the safety but-
52
ton
» Fig. 38
- with one hand and press the head restraint downwards with
the other hand.
Removing/installing
›
Pull the head restraint out of the seat backrest as far as the stop.
›
restraint out.
›
To re-insert the head restraint, push it far enough down into the seat backrest
until the locking button clicks into place.
Rear seats
Introduction
This chapter contains information on the following subjects:
Folding the rear seats into the starting position
» Fig. 38
- and pull the head
53
53
53
54
54
55
Advertisement
Chapters
Table of Contents
