Skoda 2013 Roomster Owner's Manual page 62

Removing and refitting the variable loading floor
Fig. 51 Fold up variable loading floor/remove

First read and observe the introductory information and safety warn-
ings on page 59.
Removing
›
Unhook the loops » Fig. 51 of the elastic partition out of the fixing points.
A
›
Unlock the variable loading floor by turning the locking bolts
around 180°.
›
Fold up the variable loading floor by moving it in the direction of the arrow
›
Fold up the variable loading floor in the direction of the arrow
pulling in the direction of the arrow
Install
›
Fold up the variable loading floor and place it on the carrier rails.
›
Fold out the variable loading floor.
›
Lock the variable loading floor by turning the locking bolts
right by around 180°.
›
Secure the loops of the elastic partition to the fixing points.
A
WARNING
Ensure that the carrier rails and variable loading floor are correctly fastened
when installing the variable loading floor. If this is not the case, there is a risk
of injury for the occupants.
60
Using the system
to the left by
B
and remove by
1
.
2
» Fig. 51 to the
B
Removing/installing the carrier rails
Fig. 52 Boot: Slacken check points/remove carrier rails

First read and observe the introductory information and safety warn-
ings on page 59.
Removing
›
Slacken the check points
a flat screwdriver.
›
Remove the carrier rail
. The carrier rail on the other side of the luggage compartment can be removed in
C
the same way.
Install
›
Position the carrier rails on the sides of the boot.
›
Press the check point on each carrier rail
›
Check the attachment of the carrier rails by pulling it.
WARNING
Ensure that the carrier rails and variable loading floor are correctly fastened
when installing the variable loading floor. If this is not the case, there is a risk
of injury for the occupants.

» Fig. 52 on the carrier rails using the vehicle key or
B
and remove by pulling in the direction of arrow
A
» Fig. 52 up to the stop.
B
.
1
