Skoda 2013 Roomster Owner's Manual page 18

Language
You can set the language for the warning and information texts here.
MFD displays
Activate or deactivate certain displays of the multifunction display here.
Time
The time, time format (12 or 24 hour indicator) and the changeover between sum-
mer/winter time can be set here.
Winter tyres
Here, you can set the speed at which an audible signal should sound. This func-
tion is, for example, used for winter tyres where the maximum permissible speed
is lower than the maximum speed of the vehicle.
When exceeding the speed, the following is shown on the information display:
Winter tyres: maximum ... km / h
Units of measurement
The units for the temperature, consumption and distance driven can be set here.
Second speed
The display of the second speed in mph or in km/h can be switched on here
Service
Here you can have the remaining kilometres and days until the next service inter-
val displayed, and reset the Service Interval Display.
Factory setting
The information display is returned to its factory settings by selecting the Factory
Setting menu item.
Door, boot lid and bonnet warning

First read and observe the introductory information and safety warn-
ings on page 15.
If at least one door is open, or the boot or bonnet is open, the information display
indicates the relevant open door or boot/bonnet.
An audible signal also sounds if the vehicle is travelling at more than 6 km/h.
1)
Valid for countries where the values are indicated in British measuring units.
16
Using the system
Auto Check Control

First read and observe the introductory information and safety warn-
ings on page 15.
Vehicle condition
Certain functions and conditions of individual vehicle systems are checked contin-
uously when the ignition is switched on and also while driving.
Some error messages and other information are displayed in the information dis-
play. The messages are displayed simultaneously with the symbols in the infor-
mation display or the warning lights in the instrument cluster
The Vehicle status menu item is displayed in the menu if there is at least one er-
ror message. After selecting this menu the first of the error messages is dis-
played. Several error messages are shown on the display under the message e.g.
1/3. This indicates that the first of a total of three error messages is being dis-
played.
As long as the operational faults are not rectified, the symbols are always indica-
ted again. After they are displayed for the first time, the symbols continue to be
indicated without any extra messages for the driver.
.
1)
Warning symbols

Engine oil pressure too low
Clutches of the automatic gearbox are too

hot
 Check engine oil level,

engine oil sensor faulty
Clutches of the automatic gearbox are too hot
A symbol in the information display indicates that the temperature of the

clutches of the automatic gearbox is too high.
The following is displayed in the information display:
Gearbox overheated. Stop! Owner's manual!
Stop the vehicle, switch off the engine, and wait until the symbol
risk of gearbox damage! You can continue your journey as soon as the symbol dis-

appears.
» page 17.
» page 19
» page 16
» page 19
disappears -

