Panasonic KX-TD816G User Manual page 97

4.2 DPT Features
Conditions
• Default is Ring-Calling mode.
• You can switch the desired calling mode only once during a call.
• If party you are calling is using a single line telephone (SLT), only Ring-Calling mode is
available.
Programming References
• Station Programming (Section 2)
Intercom Alerting Assignment
Feature References
Handsfree Answerback
Answering, Direct CO Line
Allows you to answer an incoming CO call by simply pressing the appropriate CO button
without lifting the handset or pressing the SP-PHONE button.
To answer an incoming CO call
1
CO
Conditions
• This feature permits you to specify the desired line to be connected if multiple incoming CO
calls arrive at the same time.
• There are three types of CO buttons: Group-CO (G-CO) button, Loop-CO (L-CO) button
and Single-CO (S-CO) button. These can be assigned on flexible buttons by Station
Programming.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment— Group-CO (G-CO) button, Loop-CO (L-CO) button,
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Preferred Line Assignment — Incoming
Feature References
Handsfree Operation
1. Press the CO button which is flashing red rapidly.
• The indicator light turns green and handsfree conversation is
established.
Single-CO (S-CO) button
A
4-13
DPT Features