Panasonic KX-TD816G User Manual page 27

2.1
To confirm the assigned function data
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
access number
2
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this section.
* A programming access number is required to program/confirm the function data by Station Programming.
†: Available when the Digital Super Hybrid System is connected to a
Proprietary Telephone capable Panasonic Voice Processing System
(one that supports proprietary telephone integration; e.g. KX-TVP100)
Programming Instructions
1. Enter the programming access number* (0 through 9, 01 through
03, 1 and #).
• Each number corresponds to the data as follows:
- 01 : Remote Station Lock Control (— Operator only)
- 1 : Preferred Line Assignment — Outgoing
- 2 : Preferred Line Assignment — Incoming
- 3 : Full One-Touch Dialing Assignment
- 4 : Intercom Alerting Assignment
- 5 : Call Waiting Tone Type Assignment
- 6 : Self-Extension Number Confirmation
- 7 : Key Click Tone On/Off Assignment
- 8 : Handset/Headset Selection
- 9 : Charge Fee Reference
- 02 : Call Log Lock Control, Incoming (— Operator only)
- 03 : Live Call Screening Password Control
- # : Station Programming Data Default Set
- 1: Live Call Screening Mode Setting
• The display shows the programmed data.
<Example>
When you press [5], the display shows:
C.W. Tone 1
(— Call Waiting tone is now programmed to Tone 1)
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
(— Operator only)
†
†
Station Programming
2-3