Panasonic KX-TD816G User Manual page 130

C
Call Transfer — to CO Line
Allows you to transfer your calls to an outside party by a Screened Call Transfer.
Screened Call Transfer
1
2
CO
3
phone number
4
5
Conditions
• Pressing the Terminate button while dialing allows you to disconnect the line, and try again.
• If you want to return to the held call, press the TRANSFER button or corresponding CO or
INTERCOM button before the destination party answers.
• "Class of Service" programming determines the extensions that can perform this feature.
Programming References
• System Programming — Installation Manual
[503] Call Transfer to CO Line
[601] Class of Service
[990] System Additional Information, Field (1)
4-46
DPT Features
While having a conversation;
1. Press the TRANSFER button.
• The other party is placed on hold.
• You hear a confirmation tone and then a dial tone.
2. Press a CO button or dial the line access code (0 or 81 through 88).
3. Dial the phone number to where calls will be transferred.
4. Wait for an answer and announce.
5. Hang up or press the SP-PHONE button.
• The call is transferred.
4.2 DPT Features