Panasonic KX-TD816G User Manual page 213

4.2 DPT Features
Checking the setting time (with a display PT only)
1
2
7 6
3
Stopping the alarm ringing
1
Conditions
• The system clock must be set beforehand.
• The alarm ringing continues for thirty seconds.
• If an alarm time has not been set, the display shows the following:
• If you are receiving an incoming call during the alarm, ringing starts after the alarm stops
sounding.
• When the preset time comes while receiving a call, the alarm starts after the conversation.
Programming References
• System Programming — Installation Manual
[100] Flexible Numbering, Timed reminder set/cancel/confirm
Feature References
Hotel Application — Timed Reminder, Remote (4.3/Operator Service Features)
1. Lift the handset or press the SP-PHONE button.
2. Dial the feature number (76) and 2.
<Example>
If "10:10" has been set, the display shows:
2
3. Hang up or press the SP-PHONE button.
1. Lift the handset or press the SP-PHONE/MONITOR button.
• Time Announce or the dial tone 3 is audible.
Alarm Not Stored
Alarm 10:10
or
Alarm 10:10*
— only one time
— every day
DPT Features
T
4-129