Extension Charge Fee Meter Clear - Panasonic KX-TD816G User Manual

2.2

Extension Charge Fee Meter Clear

Each extension charge (telephone rate) can be cleared.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
9
2
ID Code
3
1
4
extension number
5
CLR
S 1
S 2
6
...
7
or
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You must assign the ID code through System Programming.
Programming
1. Dial 9.
2. Enter the ID Code (4 digits).
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 1.
4. Dial the extension number or press the NEXT (S3) button until the
extension number will be designated.
• The display shows the meter.
<Example> If you assign the extension number 2013.
5. Press the CLR (S2) button.
• The display of the meter disappears.
S 3
6. Press the STORE button.
• If you press the NEXT (S3) button, the extension number that is
assigned at the next jack number will be displayed to advance.
7. Press the PREV (
• PREV (
• END (
Charge Meter
2013 : 00005
SEL CLR NEXT
) button or END (
) — return to step 4.
) — return to the initial programming mode.
) button.
Station Programming
2-9