Panasonic KX-TD816G User Manual page 140

C
To put both parties on hold
1
Conditions
• When you dial the telephone number of an outside party, you must dial the line access code
(0 or 81 through 88) as the leading digit.
• Up to six conference calls are allowed simultaneously.
• A conference call is also established by "Executive Busy Override."
• Pressing a CO button which is not in the conference, allows you to exit from the conference
leaving the two parties connected unless they are both CO lines. If the other two parties are
both CO lines, they will be disconnected.
• You can return to the original party before the third party answers by pressing the
TRANSFER button.
• A flexible button on the KX-T7250 (no CONF button provided) can be assigned as the
CONF button.
• When a two-party call is changed to a three-party call and vice versa, a confirmation tone is
sent to all three parties. Eliminating the tone is programmable.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Conference (CONF) Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
• System Programming — Installation Manual
[990] System Additional Information, Field (13)
Feature References
Executive Busy Override — CO Line
Executive Busy Override — Extension
4-56
DPT Features
1. Press the HOLD button.
• This feature is available only when at least one party is on a CO
line.
4.2 DPT Features