Panasonic KX-TD816G User Manual page 28

2.1
To confirm the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this section.
To clear the data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
2
3
...
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— The following list is the buttons and programming access numbers used for the Station Programming.
Detailed operating instructions are explained on each page in this section.
2-4
Station Programming
Programming Instructions
1. Press the desired Flexible (CO, DSS, PF) button.
• The display shows the current status.
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
1. Press the desired Flexible (CO, DSS, PF) button that you wish to
clear.
2. Dial 2.
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.