000
Conditions
Feature References
3-8
User Programming (Manager Programming)
3.2
User Programming (Manager Programming)
Date and Time Set
12.
Enter the hour.
To change the current entry, press CLEAR and the new hour.
Press →.
13.
14.
Enter the minute.
To change the current entry, press CLEAR and the new minutes.
15.
Press STORE.
16.
Press END.
• After changing an entry, you can press STORE. You do not have to perform
all of the rest of the steps.
• To go back to the previous field, press ← at steps 4 through 9 and steps 13
through 14.
• If you hear the alarm after pressing STORE, check that the date is valid.
• The clock starts immediately after the STORE button is pressed.
• You cannot leave the entry empty.
• The time is adjusted automatically, if the first outgoing call is made after
three o'clock each morning.
Installation Manual, Section 3, Features,
Display, Time and Date
(contd.)