Panasonic KX-TD816G User Manual page 72

3.1.1
Before entering the programming mode
Before entering programming mode, confirm that:
• Your telephone is on-hook.
• No calls are on hold at your telephone.
Entering the programming mode
To enter the User Programming (Manager Programming) mode:
Press PROGRAM + 0 + 0 .
• The display shows the Initial Message: MNG-PGM NO?->
Notes:
• If nothing is entered in five seconds after the PROGRAM button is pressed, it is cancelled.
• During the programming mode, your extension is treated as a busy extension.
• Only one proprietary telephone can be in programming mode at any one time.
3-4
User Programming (Manager Programming)
Using the Proprietary Telephone