Panasonic KX-TD816G User Manual page 68

2.2
<Example>
— To enter "Mike" by using the SELECT button;
1. Press 6 and then press the SELECT button once to enter "M."
2. Press 4 and then press the SELECT button six times to enter "i."
3. Press 5 and then press the SELECT button four times to enter "k."
4. Press 3 and then press the SELECT button four times to enter "e."
— To enter "Mike" by using the SHIFT button and the Soft button;
1. Press 6 and then press the S1 button to enter "M."
2. Press 4 and then press the SHIFT and S3 button to enter "i."
3. Press 5 and then press the S2 button to enter "k."
4. Press 3 and then press the S2 button to enter "e."
• Pressing the SHIFT button alternates between capital and small letters. Once this button
is pressed, the SHIFT mode lasts until it is pressed again.
• To erase the last word (to backspace), press the CONF (
(The CONF (
• To erase all data, press the CLR (S2) button.
Conditions
• Default is "Not Stored."
• Up to ten dialing numbers and names can be assigned. Each dialing number has a
maximum of sixteen digits and each name has a maximum of ten characters.
2-44
Station Programming
Programming
) button becomes the "←" (backspace) key when using the overlay.)
) button.