1) Remove the control panel rear cover [1].
- 2 blocking rubber pieces [2]
- 2 screws [3]
[3]
[2]
2) Remove the locking hinge left cover [1].
- 1 screw [2]
[1]
3) Remove the lock hinge right cover [1].
- 2 screws [2]
[2]
[1]
[2]
4) Remove the control panel [1].
- 1 control panel cable [2]
- 4 screws [3]
[1]
10.5.13.2 Removing the Control Panel Interface PCB
iR7105 / iR7095 / iR7086
1) Remove the upper rear right cover.
2) Disconnect the 3 connectors [1], and free the cable from the edge saddle
[2].
[1]
F-10-55
[2]
F-10-56
F-10-57
[2]
[3]
F-10-58
3) Remove the control panel interface cover [1].
- 2 screws [2]
- 8 screws [3]
[3]
4) Remove the control panel interface PCB [1].
- 6 connectors [2]
- 4 screws [3]
[3]
[3]
10.5.14 Control Panel LCD Unit
10.5.14.1 Before Starting the Work
iR7105 / iR7095 / iR7086
1) Remove the control panel.
2) Remove the 5 rubber pieces [1] from the back of the control panel.
[1]
0011-7567
3) Remove the control panel rear cover [1].
- 6 screws [2]
[2]
[1]
F-10-59
[3]
[3]
F-10-60
[1]
[2]
[2]
F-10-61
F-10-62
Chapter 10
[3]
[1]
[2]
[3]
0011-8158
[1]
10-19