Removing The Control Panel Controller (Cpu) Pcb And The Control Panel Inverter Pcb - Canon iR8500 Servise Manual

5.19.2 Removing the Control Panel Controller (CPU) PCB and the Control
Panel Inverter PCB
1) Remove the four mounting screws [1],
and disconnect the five connectors [2];
then, detach the two flat cables [3], and
detach the control panel controller
(CPU) PCB [4].
2) Remove the three screws [5], and detach
the control panel lower cover [6].
3) Disconnect the three connectors [7], and
free the harness from the harness guide
[8].
4) Remove the four screws [9], and detach
the control panel inverter PCB [10].
COPYRIGHT© 2001 CANON INC.
CHAPTER 5 MAINTENANCE AND INSPECTION
2000 2000 2000 2000 CANON iR8500 REV.0 MAR. 2001
[3] [1] [4] [1]
[1] [2]
F05-519-07
[5] [6]
F05-519-08
[8] [9] [7] [9] [7]
[10] [9] [7]
F05-519-09
[2]
[1]
[5]
[9]
5-95