Removing The Scanner Drive Cable - Canon iR7086 Series Service Manual

[2]
13) Remove the 2 screws [1], and detach the stream reading glass retainer
[2].
14) Remove the stream reading glass [3].
15) Remove the 2 screws [4], and detach the glass left retainer [5].
[3]
[2]
[1]
[4]
16) Remove the interface PCB cover.
17) Open the 2 wire saddle [1].
18) Remove the 4 screws [2], and detach the ADF power supply cover [3]
together with the harness.
[2]
[2]
19) Free the harness from the wire saddle [1], and remove the 6 screws [2];
then, detach the motor support plate [3].
[2] [3]
[2]
20) Remove the 4 screws [1], and slide out the ADF open/closed sensor cov-
er [2] to the front.
[1]
F-5-158
[4] [5]
F-5-159
[3] [1]
F-5-160
[2] [1]
F-5-161
21) Remove the 2 screws [1], and shift the scanner motor cooling fan [2] to
the side.
[1]
22) Remove the 5 screws [1], and slide out the ADF open/closed sensor base
[2] to the front.
[2]

5.4.13.3 Removing the Scanner Drive Cable

iR7105 / iR7095 / iR7086
1) Remove the 24 screws [1], and detach the reader upper frame [2].
Chapter 5
[1]
[2]
[1]
F-5-162
[2]
F-5-163
[1]
F-5-164
0011-7982
5-39